10 COOL PLUMBING TOOLS YOU NEED TO SEE 2020 AMAZON 3

Paylaş
Ekle
  • katma 22 Ağu 2020
  • 10 COOL PLUMBING TOOLS YOU NEED TO SEE 2020 AMAZON links :1.SPIN Tools SSPIN300 Swaging Spin: amzn.to/34pc0nz
    2.Nerrad Tools NTJS1522 Jet Swet Pack, Multi-Colour, 15/22 mm: amzn.to/3l6y8sZ
    3.Rothenberger 15800 Romax 3000 1/2-Inch to 2-Inch Copper Jaws Battery, Charger and Carrying Case: amzn.to/3iYOMsy
    4.WORKPRO Water Pump Pliers, 40/52mm Wide Jaw Capacity, Quick Change Adjustable Plumbing Grips and Slip Joint Plier Set: amzn.to/3lcIbwD
    5.Nerrad Tools NT3022 Ratchet Action Copper Tube Cutter: amzn.to/2FP8Q2i
    6.IWISS Pex Pipe Crimping Tool kit for 3/8,1/2,3/4,1-inch Copper Ring with Free Gauge&Pex Pipe Cutter : amzn.to/2QgMUiD
    7.Uniweld UEK1 Hydraulic Swage Tool Kit: amzn.to/2EoyFWa
    8.Nerrad Tools NT4023 Adjustable Ratchet Action Copper/INOX Tube Cutter: amzn.to/2QkvzFr
    9.LORESO Tube Bender, 3 In 1 for 1/4" 5/16" 3/8" 0-180 Degrees Tubing Bending Tools- Manual Tubing Bender for Copper, Brass, Aluminum and Thin Steel Pipes: amzn.to/34l7SVI
    10.Milwaukee 48-22-7314 CHEATER Adaptable Pipe Wrench: amzn.to/2QjC4bm

    Disclaimer: This video and description contains affiliate links

YORUMLAR • 189

  • Николай Казаков

    2:35 теперь тоже самое с нормальным давлением и кипятком
    3:52 была труба на 20 поставили на 16

    • Орел Котовский
      Орел Котовский 8 aylar önce

      Ага, а кристинку в хрущёвку в подвал лежаки крутить😂

  • Abhishek Mallik
    Abhishek Mallik Yıl önce +1

    2:38 my bike handlebar end weights are fixed in a similar manner. Tightening the screw will cause the rubber, placed inside the handlebar, to expand and grip the handle bar.

  • E De-Armond
    E De-Armond 11 aylar önce +3

    Number 8 at the 10:20 mark, the tight-fit tube cutter by NERRAD TOOLS, is worth the price of admission. Your AMAZON link shows 4 sizes priced from $41 to $128.

  • Commercial Gas Engineer
    Commercial Gas Engineer Aylar önce +2

    Being one who records whilst they work and edits in the twilight hours. I know the difficulties and how much effort goes into making these videos. Material like this is undervalued. Education has changed so much with TR-cam. Society are gaining the equivalent of a TR-cam plumbing degree. It's good when it's used for something positive like making individuals better engineers. Onsite experience is vital as well as real qualifications. Yet this media stream and experience passed on is helping nations strive to better engineering standards. It would have been a game changer if I had some of these videos when I initially qualified as a plumber 13 years ago. There was hardly anything like this to watch. It's great that the information is there for those that are thirsty to grow in their knowledge of the trade.

  • Anthony Urban
    Anthony Urban 5 aylar önce

    the work pro pliers is a great idea as long as the groove settings are robust enough to take the strain. thats the issue i see and have in the past

    • Sead Adili
      Sead Adili 3 aylar önce

      I actually have them and they are great but definetly not heavy duty work there are vetter options around but for small stuff its great especially the smaller one perfect for few corners where its hard to work

  • Alejandro Alvarez
    Alejandro Alvarez 9 aylar önce

    No parece mala idea calentar el caño antes de expandir, si total luego se va soldar, nunca lo había pensado. Muchas gracias, saludos desde Uruguay!!

  • GrimmGhost
    GrimmGhost 5 aylar önce

    On #2: How do you ream the pipe after you cut the line?

  • Spreadtrader1964
    Spreadtrader1964 7 gün önce

    at #7 where did you get the torz from ? I like the flaming very handy for tight spaces

  • Michael P
    Michael P Gün önce

    Nice to see the chap sleeving the through wall pipe, most don’t bother, does wind me up when I see a bare pipe , sometimes even cemented in without any form of sleeve , 😳 WTF!

  • Commercial Gas Engineer
    Commercial Gas Engineer Aylar önce +1

    Merry Christmas all my fellow plumbers especially those working through the holiday season. Have a good one and stay safe.

  • Eduardo Andrade
    Eduardo Andrade 5 aylar önce

    En dónde se pude conseguir el cortador de tubo el que gira interior

  • Alan Lucas
    Alan Lucas 10 aylar önce

    Quite a few fires are caused by plumbers using flames to solder joints so alternative methods are very worthwhile. On historic buildings these are the only method now allowed after a few burnt down.

  • BST Bali
    BST Bali Yıl önce +2

    A great way and technique...great job i love it

  • DAVID THOMPSON
    DAVID THOMPSON Yıl önce +5

    Why did you need a 3/4 coupling on the jet sweat bit?
    Why didn't you change that old valve on the 1/2 compressed lines?

    • The Nomenclature
      The Nomenclature 2 aylar önce

      @sam mathias The Jet Sweat?

    • sam mathias
      sam mathias 2 aylar önce

      Aye that tools nothing but a waste of money.

    • DAVID THOMPSON
      DAVID THOMPSON 11 aylar önce

      He's either not a plumber, or if he is he's lazy and not a professional!

    • Challenger SRT
      Challenger SRT Yıl önce +3

      It’s to show it’s use dummy

  • Eric Moreno
    Eric Moreno 2 aylar önce +2

    I’m digging that torch head.That thing had like six micro burners!

    • Nasty Notch
      Nasty Notch 5 gün önce

      Someone stole it sadly.

    • Nasty Notch
      Nasty Notch 5 gün önce +1

      I came up with 1 that's shaped like a half moon. Just need to heat bottom and top. But was only designed for 2 inch. I took a normal b tank torch, took off the metal tube, had one made and bent, and laser drilled the holes. Worked great!! Could sweat 2inch brass ball valves in about minute and half

  • Edson jose
    Edson jose Yıl önce

    Onde encontrar essas ferramentas no Brasil ???

  • Derek McGowan
    Derek McGowan 8 aylar önce

    As a non plumber, the tool near the end that bent 90 degrees... I'm like, wha..That works??
    Seems like it would flatten and crimp.
    Also not a materials scientist or a leverage-ologist

  • kimchee94112
    kimchee94112 7 aylar önce

    Not a pro but I've been re-piping my properties for years including a small commercial building without any of those tools for copper pipes. Would have been nice if I knew about those tools but without it forces me to do it another way with what I have.

  • Friendly Agnostic
    Friendly Agnostic 5 aylar önce

    Jet swets have saved my ass so many times before I got a pro press. Blew my mind the first time I saw it

    • Kuma Sachi
      Kuma Sachi 5 aylar önce

      I made my own version of jet swets over thirty years ago.

  • T Wolfe
    T Wolfe Yıl önce +9

    been doing plumbing for years....don't need no jet swet....use pro press...use battery powered tube cutter...manuall crimping ring sucks...expander tool is cool but limited usage...there are better more acurrate tube benders....pipe wrenches are cool but they show a wrong way of using them

  • Mr coz
    Mr coz Yıl önce +7

    There was a few items they showed here i could use,,,But buying them now after i retired would be kind of stupid

  • michael landreville
    michael landreville Yıl önce +4

    I have a couple of those tools already for years now

  • Cris T
    Cris T 11 aylar önce

    copper tube cutters are too small to cut any standard copper pipe. It won’t work. Found out the hard way

  • Way Farmer
    Way Farmer Yıl önce

    I have interest for the pipe cutter on the first video with jet asset. Is there Anyone know the name of the pipe cutter?

  • Scredly Smith
    Scredly Smith Yıl önce

    Where can I purchase those tools

  • Josh Fletcher
    Josh Fletcher Yıl önce

    With the Jet swet just snatch the fitting. You already had a 22 / 3/4 nut and olive to use

    • MrBaza87
      MrBaza87 Yıl önce +3

      The point was demonstrating it causes a water 💧 tight seal so you can solder or use a compression fitting 🔧

  • Arch Angel
    Arch Angel 3 aylar önce +1

    I don’t think we’re allowed to use these joints in the U.K. that is, not according to building regs, due to their weakening the joint.

  • Christopher boxall
    Christopher boxall Yıl önce +7

    Been a plumber for nearly 40 years and didn't see anything in the video that made me think wow

    • Mark Sherrit
      Mark Sherrit 10 aylar önce +1

      Especially the jet swet thing. Imagine fitting one of those on a main pressure pipe. You have to fully open the gate valve to fit it... then mop up for about an hour, then start working on the replacement. Fit the replacement then mop up again because the new valve also has to be fully open to remove the jet swet lol.

    • paul smith
      paul smith Yıl önce

      TOSSER

  • Oscar Arellano
    Oscar Arellano 2 aylar önce

    9:10 yo quiero saber donde encuentro ese tipo de antorcha? Si alguien me puede ayudar

  • Sakman Du
    Sakman Du Yıl önce

    You can tell the DIY handymen in these comments. I have several of these tools. They save a ton of money and more importantly time.

  • Fred Seaborne
    Fred Seaborne Yıl önce

    7:42 Nice of you folks to make a flat metal width-gauge to check my work, so that I can know whether my joint is "sercure" or not :P

  • Plumb Raider
    Plumb Raider 10 aylar önce +1

    4:41, a press gun is nice and all, but that whole copper run could’ve been bend

    • Celestix
      Celestix 8 aylar önce

      @Plumb Raider well, noone does it wasnt 100% true, i still see it done for air conditioning units (not sure if thats the proper english term) but everywhere else it has been replaced at least as far as i have seen in my company and work done by others.

    • Plumb Raider
      Plumb Raider 8 aylar önce

      @Celestix maked me a little sad, I love bending my copper and steel.

    • Celestix
      Celestix 8 aylar önce

      noone does that anymore at least here in central germany. havent seen a bend copper line since press fittings are a thing.

  • Zeus13
    Zeus13 10 aylar önce

    Could have just shut the zone valve ,good product .

  • Luis Armando Lugo
    Luis Armando Lugo Yıl önce

    Very smart!

  • Fuming Hsu
    Fuming Hsu Yıl önce

    Where could l buy these tool ?who can give me the website link, very thks!

  • Gil T
    Gil T 6 aylar önce

    When you have over a hundred rentals in the city we switched everything to cvpc. So much easier and cheaper than copper
    And now our houses aren't being broken into and trashed by those low life's

  • Wendy Miles
    Wendy Miles 8 aylar önce

    Awesome!

  • Mr. PNW
    Mr. PNW Yıl önce +17

    I’m sorry, but after watching the entire video, the only tool that I was interested In was that circular torch heating device and it wasn't in the list.

    • Matti Olkinuora
      Matti Olkinuora 9 aylar önce

      @Robert N
      Uniweld MTF-5
      tr-cam.com/video/F8Cuwt0687A/video.html

    • Robert N
      Robert N Yıl önce

      Where do I find that torch head

    • Cameron 84572
      Cameron 84572 Yıl önce

      I wasn’t the only one! 😂😂

  • ItsKruulz
    ItsKruulz Yıl önce +4

    i dont understand why you invent a tool that adds time onto labor when a coupling is 50 cents and plumbers charge $50-$100 and hour. 0.o

    • FERNANDO vega
      FERNANDO vega Yıl önce +1

      That’s not a tool meant to be used by a plumber. It’s an HVAC tool. The purpose is so you only have one fail point instead of two potential leak points .

  • Marc St Amant
    Marc St Amant Yıl önce +4

    Boy 600$ for the Jet Swet on Amazon.......I find this tool very useful...but too expensive I guess will keep using bread........

    • Karl M
      Karl M Yıl önce

      I have one made by a company called Master (product’s called “plumber’s bread”), it’s only $100 and is a life saver if you’ve got a valve that won’t seat, and building shut downs aren’t an immediate option.

  • Ronald Christ
    Ronald Christ 8 aylar önce

    Hi a new subscriber in your TR-cam channel I love to do plumber but I'm found in Africa 🌍

  • Nino Titan
    Nino Titan 10 aylar önce

    10:36 what do call that pipe bracket ?

  • PBS #007
    PBS #007 Yıl önce

    great video, thanks

  • Artoro Delagarza
    Artoro Delagarza 5 aylar önce

    Who ever came with this idea is great but where do we buy it friend

  • Klauskothaufen
    Klauskothaufen 2 gün önce

    What exactly is a NEED to see here? EVERYTHING in this list has been on the market for at the very least 5 years.
    The Romax for example was my Press between 2013 - 2018 but due to its length its unwieldy or even straight up too long for some use cases. If you buy one grab a pair of gelenkzugbacken (according to google translate articulated jaws) to go along with it they allow a bunch more ways to use this press.
    The bender or the waterpump pliers (Most Knippex have that quickadjust for well over 15 years) bring nothing new to the table either.

    Maybe im just spoiled but no. 2 wouldn't even be allowed in Germany due to the possible contamination of water flowing through the temporarily blocked part of the pipe (irrespective of wether or not this is a concern to anybody...)
    The Crimping tool? Just dont use them. AT ALL. They All suck so bad. i cant even count the number of times i've seen the result of them being blown apart by waterhammer.

    The expander nothing new here, also getting phased out due to durability concerns.

  • Anthony Urban
    Anthony Urban 5 aylar önce

    never close your crimpers all the way for storage. ruins the crimpers.

  • Vladislav Bahrah
    Vladislav Bahrah 2 aylar önce

    На 4.53 верхнее соединение сделано неправильно 🤦🏻‍♂️☝🏻.

  • John Beckwith
    John Beckwith Yıl önce +10

    I refuse to buy a metric copper tubing cutter.

    • 장옥식
      장옥식 Yıl önce

      공구가격이얼마나요구입이가능한지

    • Dall Tex
      Dall Tex Yıl önce +5

      Plus it was a left handed version 🤣

    • Stuart Arnold
      Stuart Arnold Yıl önce +2

      Whose cutter do you borrow?

  • Hvac Goat
    Hvac Goat 5 aylar önce

    These tools have been around for many yrs

  • miguel jimenez montoro

    La prensa de tubo de cobre muy bien, pero la unión cobre hierro galvanizado fatal, hay que poner manguito electrolítico, par evitar la corrosión del hierro.

  • TRỰC TIẾP TIN VUI
    TRỰC TIẾP TIN VUI Yıl önce +2

    You guys did a great job, let's create together, see you all

  • Osian Meilyr
    Osian Meilyr Yıl önce

    So why does a pipe cutter need a ratchet function?

  • Cây cảnh Chim
    Cây cảnh Chim 7 aylar önce

    👍👍👏

  • Игорь Шевченко

    Круто... Удобный инструмент.. Удобно работать.

  • Dave xjs
    Dave xjs Yıl önce

    Just Use A Expander No Drill

  • Louis P.
    Louis P. 8 aylar önce +3

    Number 7? Screw the expander swage, WHERE CAN YOU GET THAT TORCH WITH A 360 degree flame????

  • Luis Ace
    Luis Ace 10 aylar önce

    copper pipes cost more than the tool

  • Chrominance87
    Chrominance87 Yıl önce +2

    To hell with the naysayers, I love that ratcheting tubing cutter.

  • Jay Wood
    Jay Wood Yıl önce +23

    Expensive & bulky expander tool to replace a $.15 coupling when you will solder anyway? Hmm...

    • Thomas holden
      Thomas holden 9 aylar önce

      Swaging pipe thins the copper down, not a good idea anymore use a fitting

    • Sakman Du
      Sakman Du Yıl önce

      Spoken like a true DIY handyman. I'm guessing you haven't had to braze 100 joints on a job before.

    • Tom
      Tom Yıl önce +3

      Looks like it was soft copper, not rigid.

    • M S
      M S Yıl önce +4

      And same can be done with the first tool that I am sure is short money but both tools give one less joint which is one less leak point potential

    • Brad Beining
      Brad Beining Yıl önce +1

      Right

  • Innotec
    Innotec 4 aylar önce

    Oops, it's amazing 🔧

  • Mark
    Mark 9 aylar önce

    If you tried that jet swet tool with the water pressure you'd be having a very bad day.

    • Brian Rouse
      Brian Rouse 8 aylar önce

      Water needs to be still turned off, or you're gonna flood the place and get a shower at the same time

  • Elyk
    Elyk 8 aylar önce

    All this money and effort to use a swage tool..
    I’ll stick to a coupling

  • EASY Stuff DIY
    EASY Stuff DIY Yıl önce

    wow i want sam of them

  • Jakub Brzozowski
    Jakub Brzozowski Yıl önce

    What with metal filings ?

  • Henry Wight
    Henry Wight 10 aylar önce +1

    Jet sweat. How do you ream the pipe with that unit in place?

    • Brian Rouse
      Brian Rouse 8 aylar önce +1

      Do it before you put jet sweat in, even though he didn't do that, also it was a valve with unions already anyways didn't even need jet sweat

    • Mike
      Mike 10 aylar önce

      That was my first thought exactly!

  • WOODYSOOPY
    WOODYSOOPY 5 aylar önce

    Number 2 is a nice tool but is pain in the ass when the pressure is more then 50 psl

  • ppod450
    ppod450 Yıl önce +3

    All these tools have been out for years.

  • Andrev Vhelan
    Andrev Vhelan 5 aylar önce

    Milwaukee wrench, why would you use it on plastic???good luck when you over tighten it

  • Nasty Notch
    Nasty Notch 5 gün önce

    THAT JET SWEAT!!!! HOLY SHIT EVER TRIED TO SWEAT 2IN FULL??? SHIT TAKES ALL DAY TO DRAIN

  • Kenny Bisset
    Kenny Bisset 10 aylar önce

    Not much new here most of these tools have been on the market for years.

  • Marcelino Ramos
    Marcelino Ramos 7 aylar önce

    Thank you

  • ED The last tribe
    ED The last tribe 8 aylar önce

    That crimping tool 😂😂😂 , you can do whole job in compression fittings in no time , and if something goes wrong undo them again... all this shit waste of money...soldering and crimping all fittings stuck together, either way you going to cut in into pipe work.. I don’t mind pipe bending.

  • indomitusEvehementis
    indomitusEvehementis 5 gün önce

    9:40 My new blunt lighter😃

  • Jose Luis Moreno
    Jose Luis Moreno Yıl önce

    español xf quiero un equipo asi

  • Felipe Eleazar Ortega Garcia

    Con un migajon de pan tambien se puede sin gastar tanto dinero
    "Sigueme para mas consejos"

  • Robert Taft
    Robert Taft Yıl önce +5

    This is absolutely rediculous. I've been a plumber for 35 yrs. These people need to delete this crap and get in touch with a real plumber. Makes me sick watching this.

    • Arks
      Arks 7 aylar önce

      I haven't been plumbing no where near as long as you but I agree.

  • jolo
    jolo Yıl önce

    Not much use down south. We use cpvc

  • Louis P.
    Louis P. 8 aylar önce

    Why is the crimping tool anything special?

  • Artoro Delagarza
    Artoro Delagarza 5 aylar önce

    Best thing that I have seen

  • VICTOR DEZ
    VICTOR DEZ 7 aylar önce

    Half of these products have been available by other name brands...

  • Jon jonsson
    Jon jonsson Yıl önce +1

    Why even soldet when you can use a cut in coupling , that has been on the hudraulic side for 30 years, wont leak and is cheap

  • EASY Stuff DIY
    EASY Stuff DIY Yıl önce

    excellent

  • casemods
    casemods 3 gün önce

    #4 looks like a chinese Knipex cobra knock-off.

  • Tools Professional
    Tools Professional Yıl önce +2

    Fantastic!!

  • adam sharr
    adam sharr 10 aylar önce +1

    I use bread for plugging running water

    • Del Carlos
      Del Carlos 9 aylar önce +1

      I wrapped a thinger tube inside big one, can let water still running while soldering

  • Jorge Gh
    Jorge Gh Yıl önce +1

    The kit how much...I need ...

  • Warrior Gamer
    Warrior Gamer 3 gün önce

    #2 why not just turn the water off

  • SuperKiko112
    SuperKiko112 8 aylar önce

    I have a combi drill

  • USA Maine
    USA Maine Yıl önce +2

    y didn't you just solder a new valve on

  • Виталий Суровыкин

    У меня есть ключ читер от милуоки супер !!!!

  • quartytypo
    quartytypo 2 aylar önce

    My plumber is so expensive he won't make house calls.

  • Dicky O
    Dicky O 10 aylar önce +1

    1:35 lol that most be water pressure in south africa or something

  • Papa Lilburn
    Papa Lilburn 5 aylar önce

    They guy at 9:20 has a grip like my sister! LMAO!

  • Dave
    Dave Yıl önce

    Buy pex screw that or 1/2 couplers

  • James Orr
    James Orr Yıl önce +1

    Was a PLUMBING CONTRACTOR for 40 years did Repair and Service Work some of these Tools are worthless in the Real World Wouldn't Last 30 Days>>>Waste of Money!!

  • marcus Neiman
    marcus Neiman 5 aylar önce

    Christina is a nice looking plumber 12:27

  • Zoltán Horváth
    Zoltán Horváth 5 aylar önce

    15-20éves technológiák... pfff...

  • OffroadArmbar
    OffroadArmbar Yıl önce +3

    TR-cam community gets amazed by the simplest shit I swear 😂